CN 8414
Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| 8414 10 | Vacuum pumps | TARIC | ||
| 8414 10 15 00 | Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays | p/st | 0% | TARIC |
| Other | ||||
| 8414 10 25 | Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps | TARIC | ||
| 8414 10 25 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 10 25 30 | Tandem pump consisting of: -an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute, -vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute for use in the manufacture of engines of motor vehicles | p/st | 1.7% | TARIC |
| 8414 10 25 90 | Other | p/st | 1.7% | TARIC |
| Other | ||||
| 8414 10 81 | Diffusion pumps, cryopumps and absorption pumps | TARIC | ||
| 8414 10 81 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 10 81 90 | Other | p/st | 1.7% | TARIC |
| 8414 10 89 | Other | TARIC | ||
| 8414 10 89 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 10 89 90 | Other | p/st | 1.7% | TARIC |
| 8414 20 | Hand- or foot-operated air pumps | TARIC | ||
| 8414 20 20 00 | Handpumps for cycles | p/st | 1.7% | TARIC |
| 8414 20 80 | Other | TARIC | ||
| 8414 20 80 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 20 80 90 | Other | p/st | 2.2% | TARIC |
| 8414 30 | Compressors of a kind used in refrigerating equipment | TARIC | ||
| 8414 30 20 | Of a power not exceeding 0,4 kW | TARIC | ||
| 8414 30 20 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 30 20 60 | Hermetic compressor for R290 refrigerant for the production of refrigerators and freezers: -with a power not exceeding 0.4 kW, -pre-filled with lubricant from 190 ml to 210 ml, -suction and processing pipe inner diameter from 6.40 mm to 6.60 mm, -discharge pipe inner diameter from 4.80 mm to 5.00 mm, -driven by a brushless DC motor, -cooling capacity from 340 to 360 W at ASHRAE LBP 3000 rpm, -displacement from 6.5 cm³ to 7.5 cm³, -speed range from 1,600 rpm to 4,200 rpm | p/st | 2.2% | TARIC |
| 8414 30 20 90 | Other | p/st | 2.2% | TARIC |
| Of a power exceeding 0,4 kW | ||||
| 8414 30 81 | Hermetic or semi-hermetic | TARIC | ||
| 8414 30 81 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| Other | ||||
| 8414 30 81 50 | Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment | p/st | 2.2% | TARIC |
| 8414 30 81 60 | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers | p/st | 2.2% | TARIC |
| 8414 30 81 89 | Other | p/st | 2.2% | TARIC |
| 8414 30 89 | Other | TARIC | ||
| 8414 30 89 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 30 89 20 | Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW | p/st | 2.2% | TARIC |
| 8414 30 89 40 | Electrical compressor for motor vehicle air conditioning system: -with a power output of more than 0,4 kW but not exceeding 10 kW, for use in the manufacture of motor vehicles of subheading 8703 40 | p/st | 2.2% | TARIC |
| 8414 30 89 90 | Other | p/st | 2.2% | TARIC |
| 8414 40 | Air compressors mounted on a wheeled chassis for towing | TARIC | ||
| 8414 40 10 00 | Giving a flow per minute not exceeding 2 m$3 | p/st | 2.2% | TARIC |
| 8414 40 90 00 | Giving a flow per minute exceeding 2 m$3 | p/st | 2.2% | TARIC |
| Fans | ||||
| 8414 51 | Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W | TARIC | ||
| 8414 51 00 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 51 00 90 | Other | p/st | 3.2% | TARIC |
| 8414 59 | Other | TARIC | ||
| 8414 59 15 00 | Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines | p/st | 0% | TARIC |
| Other | ||||
| 8414 59 25 | Axial fans | TARIC | ||
| 8414 59 25 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 59 25 50 | Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with -a direct current operating voltage of more than 10 V but not more than 14 V, or -an alternating current operating voltage of more than 185 V, but not more than 254 V, -an operating temperature of -40 °C or higher, but not higher than 70 °C, for use in the manufacture of heat pump tumble dryers and refrigerators or freezers | p/st | 2.3% | TARIC |
| 8414 59 25 60 | Axial Fan, for incorporation into instrument clusters, speedometers and infotainment systems of transport vehicles as motor vehicles of headings 8701 to 8705, with: -an air flow of not more than 0,75 m3/min (cubic meter per minute) -an air pressure of not more than 10 mmH2O -an overall acoustic noise of not more than 45 dB(A) -a diameter of not more than 65mm Equipped with DC Brushless motor with: -a rated voltage between: 3 to 16 VDC -an operating voltage between: 3 to 16 VDC -a rated current between: 0,03 to 0,30 A -an input power between: 0,3 to 1,5 W -a rotation speed between: 2500 to 10000 R.P.M, With or without a heat sink incorporated | p/st | 2.3% | TARIC |
| 8414 59 25 90 | Other | p/st | 2.3% | TARIC |
| 8414 59 35 | Centrifugal fans | TARIC | ||
| 8414 59 35 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 59 35 20 | Radial fan, with: -a dimension of 25mm (height) x 85mm (width) x 85mm (depth), -a weight of 120 g, -a rated voltage of 13,6 VDC (direct current voltage), -an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage), -a rated current of 1,1 A (TYP), -a rated power of 15 W, -a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow), -an air flow of not more than 17,5 litre/s, -an air pressure of not more than16 mm H2O ≈ 157 Pa, -an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), and with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems | p/st | 2.3% | TARIC |
| 8414 59 35 30 | Electric blower for cooling the high-voltage battery of a hybrid passenger car with: -a control unit, -MOSFET inverter, -a voltage of 9 V or more but not more than 16 V, -ambient temperature of - 40 °C or more, but not more than 80 °C, for use in the manufacture of hybrid passenger cars | p/st | 2.3% | TARIC |
| 8414 59 35 40 | Electric blower for cooling the battery module: -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a centrifugal electric fan, -with a connector, -with a plastic case, -with or without a control unit for the fan electric motor, for use in the production of rechargeable batteries for hybrid and electric vehicles | p/st | 2.3% | TARIC |
| 8414 59 35 50 | DC motor centrifugal fan with: -a nominal voltage of 8 V or more, but not more than 13 V, -a nominal maximum speed of 1400 rpm or more, but not more than 1950 rpm, -a horizontal or vertical position of the fan blades shaft, -a boosting time of not more than 10 seconds, -a cable with a length of 30 cm or more, but not more than 50 cm, with RAST 2,5 connector, -a nominal power of 0,7 W or more, but not more than 3,5 W, -a tacho or feedback signal to monitor the speed | p/st | 2.3% | TARIC |
| 8414 59 35 90 | Other | p/st | 2.3% | TARIC |
| 8414 59 95 | Other | TARIC | ||
| 8414 59 95 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 59 95 90 | Other | p/st | 2.3% | TARIC |
| 8414 60 00 00 | Hoods having a maximum horizontal side not exceeding 120 cm | p/st | 2.7% | TARIC |
| 8414 70 00 00 | Gas-tight biological safety cabinets | p/st | 2.2% | TARIC |
| 8414 80 | Other | TARIC | ||
| Turbo-compressors | ||||
| 8414 80 11 | Single-stage | TARIC | ||
| 8414 80 11 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 11 90 | Other | p/st | 2.2% | TARIC |
| 8414 80 19 | Multi-stage | TARIC | ||
| 8414 80 19 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 19 90 | Other | p/st | 2.2% | TARIC |
| Reciprocating displacement compressors, having a gauge pressure capacity of | ||||
| Not exceeding 15 bar, giving a flow per hour | ||||
| 8414 80 22 | Not exceeding 60 m$3 | TARIC | ||
| 8414 80 22 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 22 20 | Air membrane compressor with: - a flow of 4,5 l/min or more, but not more than 12 l/min, - power input of not more than 14 W, and - a gauge pressure capacity not exceeding 400 hPa (0,4 bar) of a kind used in the production of motor vehicle seats | p/st | 2.2% | TARIC |
| 8414 80 22 90 | Other | p/st | 2.2% | TARIC |
| 8414 80 28 | Exceeding 60 m$3 | TARIC | ||
| 8414 80 28 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 28 90 | Other | p/st | 2.2% | TARIC |
| Exceeding 15 bar, giving a flow per hour | ||||
| 8414 80 51 | Not exceeding 120 m$3 | TARIC | ||
| 8414 80 51 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 51 90 | Other | p/st | 2.2% | TARIC |
| 8414 80 59 | Exceeding 120 m$3 | TARIC | ||
| 8414 80 59 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 59 90 | Other | p/st | 2.2% | TARIC |
| Rotary displacement compressors | ||||
| 8414 80 73 | Single-shaft | TARIC | ||
| 8414 80 73 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| Other | ||||
| 8414 80 73 30 | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers | p/st | 2.2% | TARIC |
| 8414 80 73 50 | Hermetic heat pump compressor for R450A or R290 refrigerants: - not charged with refrigerant, - pre-charged with lubricant oil, - with a single phase induction permanent split capacitor motor or a DC brushless motor, - having suction and/or discharge connections, - with a displacement of 8,05 cm3 or more, but not more than 55 cm3, - running at 900 rpm or more, but not more than 7 800 rpm, and - with a cooling capacity of 920 W or more, but not more than 10 440 W in ASHRAE conditions | p/st | 2.2% | TARIC |
| 8414 80 73 89 | Other | p/st | 2.2% | TARIC |
| Multi-shaft | ||||
| 8414 80 75 | Screw compressors | TARIC | ||
| 8414 80 75 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 75 90 | Other | p/st | 2.2% | TARIC |
| 8414 80 78 | Other | TARIC | ||
| 8414 80 78 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 78 90 | Other | p/st | 2.2% | TARIC |
| 8414 80 80 | Other | TARIC | ||
| 8414 80 80 10 | For use in civil aircraft | p/st | 0% (end-use) | TARIC |
| 8414 80 80 90 | Other | p/st | 2.2% | TARIC |
| 8414 90 | Parts | TARIC | ||
| 8414 90 00 10 | For use in civil aircraft | 0% (end-use) | TARIC | |
| 8414 90 00 15 | Fan assembly made of aluminium and magnesium alloy: -with an outer diameter of 54 mm or more but not more than 130 mm, -with a height of 8 mm or more but not more than 30 mm, -with two discs connected by blades of involute shape, -with or without dowel, and with or without washer, for use in the manufacture of electromotors | 2.2% | TARIC | |
| 8414 90 00 20 | Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles | p/st | 2.2% | TARIC |
| 8414 90 00 25 | Scroll type compressor housing of an aluminium alloy of a kind with: -a heat resistance of 200 °C or more but not more than 250 °C, -one or more fixing points suitable for mounting an actuator, for use in the manufacture of turbochargers | 2.2% | TARIC | |
| 8414 90 00 35 | Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with: -a width of 115 mm or more but not more than 160 mm, -a length of 115 mm or more but not more than 170 mm, -a height of 30 mm or more but not more than 100 mm, -a piece of pressure branch with pipe connection, -one or two mounting holes and -more than one overflowing hole | 2.2% | TARIC | |
| 8414 90 00 45 | Pressure casted rotor front plate or cover of an electric supercharger: -of EN AC-46000 aluminium, -shot-blasted and machined, -with a hardness of 60 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), -with a tensile strength of 240 N/mm2 or more, -with a height of 22 mm or more but not more than 26 mm, -with a diameter of 128 mm or more but not more than 136 mm, -with a weight of 220 g or more but not more than 250 g | p/st | 2.2% | TARIC |
| 8414 90 00 55 | Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: -with a width of 100 mm or more but not more than 220 mm, -with a length of 100 mm or more but not more than 230 mm, -with a height of 80 mm or more but not more than 180 mm, -with one single central bore, -machined by CNC milling or unwrought, -whether or not impregnated, -with one suction port or without | 2.2% | TARIC | |
| 8414 90 00 80 | Turbocharger wheel housing of cast aluminium alloy or cast iron: - with a heat resistance up to 400°C, - with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry | p/st | 2.2% | TARIC |
| 8414 90 00 90 | Other | 2.2% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 8414 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.