HTS 7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| Of silicon electrical steel | ||||||
| 7226.11 | Grain-oriented | USITC | ||||
| 7226.11.10.00 | Of a width of 300 mm or more | kg | Free | 28% | USITC | |
| 7226.11.90 | Of a width of less than 300 mm | Free | 33% | USITC | ||
| 7226.11.90.30 | Of thickness not exceeding 0.25 mm | kg | Free | 33% | USITC | |
| 7226.11.90.60 | Other | kg | Free | 33% | USITC | |
| 7226.19 | Other | USITC | ||||
| 7226.19.10.00 | Of a width of 300 mm or more | kg | Free | 28% | USITC | |
| 7226.19.90.00 | Of a width of less than 300 mm | kg | Free | 33% | USITC | |
| 7226.20.00.00 | Of high-speed steel | kg | Free | 37% | USITC | |
| Other | ||||||
| 7226.91 | Not further worked than hot-rolled | USITC | ||||
| Of tool steel (other than high-speed steel) | ||||||
| 7226.91.05.00 | Of chipper knife steel | kg | Free | 34% | USITC | |
| Other | ||||||
| 7226.91.15 | Of a width of 300 mm or more | Free | 29% | USITC | ||
| 7226.91.15.30 | Of ball-bearing steel | kg | Free | 29% | USITC | |
| 7226.91.15.60 | Other | kg | Free | 29% | USITC | |
| 7226.91.25 | Of a width of less than 300 mm | Free | 34% | USITC | ||
| 7226.91.25.30 | Of ball-bearing steel | kg | Free | 34% | USITC | |
| 7226.91.25.60 | Other | kg | Free | 34% | USITC | |
| Other | ||||||
| 7226.91.50.00 | Of a thickness of 4.75 mm or more | kg | Free | 28% | USITC | |
| Of a thickness of less than 4.75 mm | ||||||
| 7226.91.70.00 | Of a width of 300 mm or more | kg | Free | 28% | USITC | |
| 7226.91.80.00 | Of a width of less than 300 mm | kg | Free | 33% | USITC | |
| 7226.92 | Not further worked than cold-rolled (cold-reduced) | USITC | ||||
| Of tool steel (other than high-speed steel) | ||||||
| 7226.92.10 | Of a width of 300 mm or more | Free | 0.4¢/kg + 29% | USITC | ||
| 7226.92.10.30 | Of ball-bearing steel | kg | Free | 0.4¢/kg + 29% | USITC | |
| 7226.92.10.60 | Other | kg | Free | 0.4¢/kg + 29% | USITC | |
| 7226.92.30 | Of a width of less than 300 mm | Free | 34% | USITC | ||
| 7226.92.30.30 | Of ball-bearing steel | kg | Free | 34% | USITC | |
| 7226.92.30.60 | Other | kg | Free | 34% | USITC | |
| Other | ||||||
| 7226.92.50.00 | Of a width of 300 mm or more | kg | Free | 0.4¢/kg + 28% | USITC | |
| Of a width of less than 300 mm | ||||||
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | Free | 33% | USITC | ||
| 7226.92.70.05 | Of high-nickel alloy steel | kg | Free | 33% | USITC | |
| 7226.92.70.50 | Other | kg | Free | 33% | USITC | |
| 7226.92.80 | Of a thickness exceeding 0.25 mm | Free | 33% | USITC | ||
| 7226.92.80.05 | Of high-nickel alloy steel | kg | Free | 33% | USITC | |
| 7226.92.80.50 | Other | kg | Free | 33% | USITC | |
| 7226.99.01 | Other | Free | 33% | USITC | ||
| 7226.99.01.10 | Electrolytically plated or coated with zinc | kg | Free | 33% | USITC | |
| 7226.99.01.30 | Otherwise plated or coated with zinc | kg | Free | 33% | USITC | |
| 7226.99.01.80 | Other | kg | Free | 33% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7226 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.