HTS 7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| Of silicon electrical steel | ||||||
| 7225.11.00.00 | Grain-oriented | kg | Free | 28% | USITC | |
| 7225.19.00.00 | Other | kg | Free | 28% | USITC | |
| 7225.30 | Other, not further worked than hot-rolled, in coils | USITC | ||||
| Of a thickness of 4.75 mm or more | ||||||
| 7225.30.11 | Of tool steel | Free | 29% | USITC | ||
| 7225.30.11.10 | Of high-speed steel | kg | Free | 29% | USITC | |
| 7225.30.11.80 | Other | kg | Free | 29% | USITC | |
| 7225.30.30 | Other | Free | 28% | USITC | ||
| 7225.30.30.05 | Of high-nickel alloy steel | kg | Free | 28% | USITC | |
| 7225.30.30.50 | Other | kg | Free | 28% | USITC | |
| Of a thickness of less than 4.75 mm | ||||||
| 7225.30.51 | Of tool steel | Free | 29% | USITC | ||
| 7225.30.51.10 | Of high-speed steel | kg | Free | 29% | USITC | |
| 7225.30.51.80 | Other | kg | Free | 29% | USITC | |
| 7225.30.70.00 | Other | kg | Free | 28% | USITC | |
| 7225.40 | Other, not further worked than hot-rolled, not in coils | USITC | ||||
| Of a thickness of 4.75 mm or more | ||||||
| 7225.40.11 | Of tool steel | Free | 29% | USITC | ||
| 7225.40.11.10 | Of high-speed steel | kg | Free | 29% | USITC | |
| 7225.40.11.80 | Other | kg | Free | 29% | USITC | |
| 7225.40.30 | Other | Free | 28% | USITC | ||
| 7225.40.30.05 | Of high-nickel alloy steel | kg | Free | 28% | USITC | |
| 7225.40.30.50 | Other | kg | Free | 28% | USITC | |
| Of a thickness of less than 4.75 mm | ||||||
| 7225.40.51 | Of tool steel | Free | 29% | USITC | ||
| 7225.40.51.10 | Of high-speed steel | kg | Free | 29% | USITC | |
| 7225.40.51.30 | Of ball-bearing steel | kg | Free | 29% | USITC | |
| 7225.40.51.60 | Other | kg | Free | 29% | USITC | |
| 7225.40.70.00 | Other | kg | Free | 28% | USITC | |
| 7225.50 | Other, not further worked than cold-rolled (cold-reduced) | USITC | ||||
| 7225.50.11 | Of tool steel | Free | 29% | USITC | ||
| 7225.50.11.10 | Of high-speed steel | kg | Free | 29% | USITC | |
| 7225.50.11.30 | Of ball-bearing steel | kg | Free | 29% | USITC | |
| 7225.50.11.60 | Other | kg | Free | 29% | USITC | |
| Other | ||||||
| 7225.50.60.00 | Of a thickness of 4.75 mm or more | kg | Free | 28% | USITC | |
| Of a thickness of less than 4.75 mm | ||||||
| 7225.50.70.00 | Heat-resisting steel | kg | Free | 29% | USITC | |
| 7225.50.80 | Other | Free | 28% | USITC | ||
| 7225.50.80.10 | Of high-nickel alloy steel | kg | Free | 28% | USITC | |
| 7225.50.80.80 | Other | kg | Free | 28% | USITC | |
| Other | ||||||
| 7225.91.00.00 | Electrolytically plated or coated with zinc | kg | Free | 28% | USITC | |
| 7225.92.00.00 | Otherwise plated or coated with zinc | kg | Free | 28% | USITC | |
| 7225.99.00 | Other | Free | 28% | USITC | ||
| 7225.99.00.10 | Of high-nickel alloy steel | kg | Free | 28% | USITC | |
| 7225.99.00.90 | Other | kg | Free | 28% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7225 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.