HTS 7209
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| In coils, not further worked than cold-rolled (cold-reduced) | ||||||
| 7209.15.00.00 | Of a thickness of 3 mm or more | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.16.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | 0.4¢/kg + 20% | USITC | ||
| Of high-strength steel | ||||||
| Annealed | ||||||
| 7209.16.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.16.00.45 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.16.00.60 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| Other | ||||||
| 7209.16.00.70 | Annealed | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.16.00.91 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.17.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free | 0.4¢/kg + 20% | USITC | ||
| Of high-strength steel | ||||||
| Annealed | ||||||
| 7209.17.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.17.00.45 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.17.00.60 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| Other | ||||||
| 7209.17.00.70 | Annealed | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.17.00.91 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.18 | Of a thickness of less than 0.5 mm | USITC | ||||
| 7209.18.15 | Of high-strength steel | Free | 0.4¢/kg + 20% | USITC | ||
| 7209.18.15.30 | Annealed | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.18.15.60 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| Other | ||||||
| 7209.18.25 | Of a thickness of less than 0.361 mm (blackplate) | Free | 20% | USITC | ||
| 7209.18.25.20 | Annealed | kg | Free | 20% | USITC | |
| 7209.18.25.85 | Other | kg | Free | 20% | USITC | |
| 7209.18.60 | Other | Free | 0.4¢/kg + 20% | USITC | ||
| 7209.18.60.20 | Annealed | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.18.60.90 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| Not in coils, not further worked than cold-rolled (cold-reduced) | ||||||
| 7209.25.00.00 | Of a thickness of 3 mm or more | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.26.00.00 | Of a thickness exceeding 1 mm but less than 3 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.27.00.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.28.00.00 | Of a thickness of less than 0.5 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7209.90.00.00 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7209 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.