HTS 7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief | USITC | ||||
| 7208.10.15.00 | Pickled | kg | Free | 0.4¢/kg + 20% | USITC | |
| Other | ||||||
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | kg | Free | 20% | USITC | |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | kg | Free | 20% | USITC | |
| Other, in coils, not further worked than hot-rolled, pickled | ||||||
| 7208.25 | Of a thickness of 4.75 mm or more | USITC | ||||
| 7208.25.30.00 | Of high-strength steel | kg | Free | 20% | USITC | |
| 7208.25.60.00 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 0.4¢/kg + 20% | USITC | ||
| 7208.26.00.30 | High-strength steel | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7208.26.00.60 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7208.27.00 | Of a thickness of less than 3 mm | Free | 0.4¢/kg + 20% | USITC | ||
| High-strength steel | ||||||
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7208.27.00.45 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7208.27.00.60 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| Other, in coils, not further worked than hot-rolled | ||||||
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | 20% | USITC | ||
| 7208.36.00.30 | High-strength steel | kg | Free | 20% | USITC | |
| 7208.36.00.60 | Other | kg | Free | 20% | USITC | |
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 20% | USITC | ||
| 7208.37.00.30 | High-strength steel | kg | Free | 20% | USITC | |
| 7208.37.00.60 | Other | kg | Free | 20% | USITC | |
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 20% | USITC | ||
| 7208.38.00.15 | High-strength steel | kg | Free | 20% | USITC | |
| Other | ||||||
| 7208.38.00.30 | With untrimmed edges | kg | Free | 20% | USITC | |
| 7208.38.00.90 | Other | kg | Free | 20% | USITC | |
| 7208.39.00 | Of a thickness of less than 3 mm | Free | 20% | USITC | ||
| High-strength steel | ||||||
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | Free | 20% | USITC | |
| 7208.39.00.25 | Other | kg | Free | 20% | USITC | |
| Other | ||||||
| 7208.39.00.30 | With untrimmed edges | kg | Free | 20% | USITC | |
| 7208.39.00.90 | Other | kg | Free | 20% | USITC | |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief | USITC | ||||
| 7208.40.30 | Of a thickness of 4.75 mm or more | Free | 20% | USITC | ||
| 7208.40.30.30 | Of a thickness exceeding 10 mm | kg | Free | 20% | USITC | |
| 7208.40.30.60 | Other | kg | Free | 20% | USITC | |
| 7208.40.60 | Of a thickness of less than 4.75 mm | Free | 20% | USITC | ||
| 7208.40.60.30 | Of a thickness less than 3 mm | kg | Free | 20% | USITC | |
| 7208.40.60.60 | Other | kg | Free | 20% | USITC | |
| Other, not in coils, not further worked than hot-rolled | ||||||
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | 20% | USITC | ||
| 7208.51.00.30 | Universal mill plate | kg | Free | 20% | USITC | |
| Other | ||||||
| 7208.51.00.45 | Of high-strength steel | kg | Free | 20% | USITC | |
| 7208.51.00.60 | Other | kg | Free | 20% | USITC | |
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | kg | Free | 20% | USITC | |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | kg | Free | 20% | USITC | |
| 7208.54.00.00 | Of a thickness of less than 3 mm | kg | Free | 20% | USITC | |
| 7208.90.00.00 | Other | kg | Free | 20% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7208 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.