CN 8482
Ball or roller bearings
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| 8482 10 | Ball bearings | TARIC | ||
| 8482 10 10 | With greatest external diameter not exceeding 30 mm | TARIC | ||
| 8482 10 10 15 | Ball bearings with: -an internal diameter of 4 mm or more but not more than 9 mm, -an external diameter of not more than 26 mm, -a width of not more than 8 mm, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm | 8% | TARIC | |
| 8482 10 10 90 | Other | 8% | TARIC | |
| 8482 10 90 00 | Other | 8% | TARIC | |
| 8482 20 00 00 | Tapered roller bearings, including cone and tapered roller assemblies | 8% | TARIC | |
| 8482 30 00 00 | Spherical roller bearings | 8% | TARIC | |
| 8482 40 00 00 | Needle roller bearings, including cage and needle roller assemblies | 8% | TARIC | |
| 8482 50 | Other cylindrical roller bearings, including cage and roller assemblies | TARIC | ||
| 8482 50 00 20 | Axial roller bearing made of steel: -the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98, -the rollers are made of anti-friction steel according to ASTM 295-94, -with an external diameter of 63 mm or more but not more than 66 mm, -with an internal diameter of 44 mm or more but not more than 46 mm, -with a weight of 23 g or more but not more than 27 g, -with 36 rollers or more but not more than 38 rollers | p/st | 8% | TARIC |
| 8482 50 00 90 | Other | 8% | TARIC | |
| 8482 80 | Other, including combined ball/roller bearings | TARIC | ||
| 8482 80 00 10 | Connecting components for use in the production of helicopter tail rotor shafts | p/st | 8% | TARIC |
| 8482 80 00 90 | Other | 8% | TARIC | |
| Parts | ||||
| 8482 91 | Balls, needles and rollers | TARIC | ||
| 8482 91 10 00 | Tapered rollers | 8% | TARIC | |
| 8482 91 90 | Other | TARIC | ||
| 8482 91 90 10 | Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), - with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry | p/st | 7.7% | TARIC |
| 8482 91 90 90 | Other | 7.7% | TARIC | |
| 8482 99 | Other | TARIC | ||
| 8482 99 00 30 | Brass cages with the following characteristics: – continuously or centrifugally cast, – turned, – containing by weight 35 % or more, but not more than 38 % of zinc, – containing by weight 0,75 % or more, but not more than 1,25 % of lead, – containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and – with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings | p/st | 8% | TARIC |
| 8482 99 00 60 | Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings | p/st | 8% | TARIC |
| 8482 99 00 70 | Male and female parts of cages, - made of flat-rolled steel, - with a diameter of 14,5 mm or more but not more than 420 mm, - the male part including rivets, - the female part including holes, used for manufacturing of deep grove ball bearings | 8% | TARIC | |
| 8482 99 00 80 | Punched cages of various diameters, - made of flat rolled steel, - with tensile strength of 270 MPa or more, for the production of tapered roller bearings | p/st | 8% | TARIC |
| 8482 99 00 90 | Other | 8% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 8482 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.