CN 8481
Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| 8481 10 | Pressure-reducing valves | TARIC | ||
| 8481 10 05 | Combined with filters or lubricators | TARIC | ||
| 8481 10 05 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 10 05 90 | Other | 2.2% | TARIC | |
| Other | ||||
| 8481 10 19 | Of cast iron or of steel | TARIC | ||
| 8481 10 19 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 10 19 90 | Other | 2.2% | TARIC | |
| 8481 10 99 | Other | TARIC | ||
| 8481 10 99 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 10 99 40 | Pressure reducing valves in a brass case with: -a length of not more than 30 mm (± 1 mm), -a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles | 2.2% | TARIC | |
| 8481 10 99 90 | Other | 2.2% | TARIC | |
| 8481 20 | Valves for oleohydraulic or pneumatic transmissions | TARIC | ||
| 8481 20 10 | Valves for the control of oleohydraulic power transmission | TARIC | ||
| 8481 20 10 20 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 20 10 90 | Other | 2.2% | TARIC | |
| 8481 20 90 | Valves for the control of pneumatic power transmission | TARIC | ||
| 8481 20 90 20 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 20 90 90 | Other | 2.2% | TARIC | |
| 8481 30 | Check (non-return) valves | TARIC | ||
| 8481 30 91 | Of cast iron or of steel | TARIC | ||
| 8481 30 91 20 | For use in certain types of aircraft | 2.2% | TARIC | |
| Other | ||||
| 8481 30 91 30 | Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel | 2.2% | TARIC | |
| 8481 30 91 91 | Steel check (non-return) valves with: - an opening pressure of not more than 800 kPa - an external diameter not more than 37 mm | p/st | 2.2% | TARIC |
| 8481 30 91 99 | Other | 2.2% | TARIC | |
| 8481 30 99 | Other | TARIC | ||
| 8481 30 99 20 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 30 99 50 | Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel | 2.2% | TARIC | |
| 8481 30 99 90 | Other | 2.2% | TARIC | |
| 8481 40 | Safety or relief valves | TARIC | ||
| 8481 40 10 | Of cast iron or of steel | TARIC | ||
| 8481 40 10 50 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 40 10 90 | Other | 2.2% | TARIC | |
| 8481 40 90 | Other | TARIC | ||
| 8481 40 90 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 40 90 90 | Other | 2.2% | TARIC | |
| 8481 80 | Other appliances | TARIC | ||
| Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures | ||||
| 8481 80 11 | Mixing valves | TARIC | ||
| 8481 80 11 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 11 90 | Other | 2.2% | TARIC | |
| 8481 80 19 | Other | TARIC | ||
| 8481 80 19 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 19 90 | Other | 2.2% | TARIC | |
| Central heating radiator valves | ||||
| 8481 80 31 00 | Thermostatic valves | 2.2% | TARIC | |
| 8481 80 39 00 | Other | 2.2% | TARIC | |
| 8481 80 40 | Valves for pneumatic tyres and inner tubes | TARIC | ||
| 8481 80 40 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 40 90 | Other | 2.2% | TARIC | |
| Other | ||||
| Process control valves | ||||
| 8481 80 51 00 | Temperature regulators | 2.2% | TARIC | |
| 8481 80 59 | Other | TARIC | ||
| 8481 80 59 20 | Pressure regulating valve for incorporation into compressors of motor vehicle air condition units | p/st | 2.2% | TARIC |
| 8481 80 59 30 | Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure | 2.2% | TARIC | |
| 8481 80 59 40 | Flow-control valve - made of steel, - with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm, - with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm, - with chromium nitride coating, - with a surface roughness of Rp 0,4 | 2.2% | TARIC | |
| 8481 80 59 50 | Electromagnetic valve for quantity control with - a plunger, - a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm | 2.2% | TARIC | |
| 8481 80 59 60 | Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH | 2.2% | TARIC | |
| 8481 80 59 70 | Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm | 2.2% | TARIC | |
| 8481 80 59 80 | Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines | 2.2% | TARIC | |
| 8481 80 59 90 | Other | 2.2% | TARIC | |
| Other | ||||
| Gate valves | ||||
| 8481 80 61 00 | Of cast iron | 2.2% | TARIC | |
| 8481 80 63 | Of steel | TARIC | ||
| 8481 80 63 50 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 63 90 | Other | 2.2% | TARIC | |
| 8481 80 69 | Other | TARIC | ||
| 8481 80 69 50 | For use in certain types of aircraft | 2.2% | TARIC | |
| Other | ||||
| 8481 80 69 60 | Four-way reversing valve for refrigerants, consisting of: - a solenoid pilot valve - a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa | p/st | 2.2% | TARIC |
| 8481 80 69 99 | Other | 2.2% | TARIC | |
| Globe valves | ||||
| 8481 80 71 00 | Of cast iron | 2.2% | TARIC | |
| 8481 80 73 | Of steel | TARIC | ||
| 8481 80 73 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 73 20 | Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kPa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet | 2.2% | TARIC | |
| 8481 80 73 90 | Other | 2.2% | TARIC | |
| 8481 80 79 | Other | TARIC | ||
| 8481 80 79 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 79 40 | Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6,3 MPa, -a leakage ratio of less than 1.6 g/a, -an impurity ratio of less than 1.2 mg/PCS, -an airtight pressure of the valve body of 4.2 Mpa for use in the manufacture of air conditioners | 2.2% | TARIC | |
| 8481 80 79 90 | Other | 2.2% | TARIC | |
| 8481 80 81 | Ball and plug valves | TARIC | ||
| 8481 80 81 30 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 81 90 | Other | 2.2% | TARIC | |
| 8481 80 85 | Butterfly valves | TARIC | ||
| 8481 80 85 30 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 85 90 | Other | 2.2% | TARIC | |
| 8481 80 87 | Diaphragm valves | TARIC | ||
| 8481 80 87 30 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 87 90 | Other | 2.2% | TARIC | |
| 8481 80 99 | Other | TARIC | ||
| 8481 80 99 40 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 80 99 70 | Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kPa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet | 2.2% | TARIC | |
| 8481 80 99 80 | Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load: -in metal cover, -with electrical connector, -with a force of not more than 10 N, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a length of 80 mm or more but not more than 110 mm, -with a width of 80 mm or more but not more than 110 mm, -with a height of 20 mm or more but not more than 30 mm, for use in the manufacture of engines of motor vehicles | 2.2% | TARIC | |
| 8481 80 99 90 | Other | 2.2% | TARIC | |
| 8481 90 | Parts | TARIC | ||
| 8481 90 00 10 | For use in certain types of aircraft | 2.2% | TARIC | |
| 8481 90 00 25 | Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium EN AC-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g | p/st | 2.2% | TARIC |
| 8481 90 00 40 | Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s) | 2.2% | TARIC | |
| 8481 90 00 50 | Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | p/st | 2.2% | TARIC |
| 8481 90 00 60 | Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute | 2.2% | TARIC | |
| 8481 90 00 70 | Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating | 2.2% | TARIC | |
| 8481 90 00 80 | Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm | 2.2% | TARIC | |
| 8481 90 00 90 | Other | 2.2% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 8481 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.