HTS 7317
Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| 7317.00 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper | USITC | ||||
| 7317.00.10.00 | Thumb tacks | kg | Free | 4% | USITC | |
| Other, suitable for use in powder-actuated handtools | ||||||
| 7317.00.20.00 | Not threaded | kg | Free | 1.5¢/kg | USITC | |
| 7317.00.30.00 | Threaded | kg | Free | 45% | USITC | |
| Other | ||||||
| Of one piece construction | ||||||
| 7317.00.55 | Made of round wire | Free | 3.5% | USITC | ||
| Collated nails | ||||||
| 7317.00.55.01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | kg | Free | 3.5% | USITC | |
| Other | ||||||
| Assembled in a wire coil | ||||||
| 7317.00.55.02 | Galvanized | kg | Free | 3.5% | USITC | |
| 7317.00.55.03 | Other | kg | Free | 3.5% | USITC | |
| Assembled in a plastic strip | ||||||
| 7317.00.55.05 | Galvanized | kg | Free | 3.5% | USITC | |
| 7317.00.55.07 | Other | kg | Free | 3.5% | USITC | |
| 7317.00.55.08 | Assembled in a paper strip | kg | Free | 3.5% | USITC | |
| 7317.00.55.11 | Assembled in a wire strip | kg | Free | 3.5% | USITC | |
| 7317.00.55.18 | Other | kg | Free | 3.5% | USITC | |
| Other | ||||||
| 7317.00.55.19 | With a length of less than 25.4 mm and with a diameter of less than 1.65 mm | kg | Free | 3.5% | USITC | |
| Other | ||||||
| Smooth shank | ||||||
| 7317.00.55.20 | Not coated, plated or painted | kg | Free | 3.5% | USITC | |
| Coated, plated or painted | ||||||
| 7317.00.55.30 | Galvanized | kg | Free | 3.5% | USITC | |
| 7317.00.55.40 | Vinyl, resin or cement coated | kg | Free | 3.5% | USITC | |
| 7317.00.55.50 | Other | kg | Free | 3.5% | USITC | |
| Other | ||||||
| 7317.00.55.60 | Not coated, plated or painted | kg | Free | 3.5% | USITC | |
| Coated, plated or painted | ||||||
| 7317.00.55.70 | Galvanized | kg | Free | 3.5% | USITC | |
| 7317.00.55.80 | Vinyl, resin or cement coated | kg | Free | 3.5% | USITC | |
| 7317.00.55.90 | Other | kg | Free | 3.5% | USITC | |
| 7317.00.65 | Other | Free | 5.5% | USITC | ||
| 7317.00.65.30 | Cut | kg | Free | 5.5% | USITC | |
| 7317.00.65.60 | Other | kg | Free | 5.5% | USITC | |
| 7317.00.75.00 | Of two or more pieces | kg | Free | 8% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7317 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.