HTS 7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| 7228.10.00 | Bars and rods, of high-speed steel | Free | 32% | USITC | ||
| 7228.10.00.10 | Not cold-formed | kg | Free | 32% | USITC | |
| Cold-formed | ||||||
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than 18 mm | kg | Free | 32% | USITC | |
| 7228.10.00.60 | With a maximum cross-sectional dimension of 18 mm or more | kg | Free | 32% | USITC | |
| 7228.20 | Bars and rods, of silico-manganese steel | USITC | ||||
| 7228.20.10.00 | Not cold-formed | kg | Free | 28% | USITC | |
| 7228.20.50.00 | Cold-formed | kg | Free | 28% | USITC | |
| Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | ||||||
| 7228.30 | Of tool steel (other than high-speed steel) | USITC | ||||
| 7228.30.20.00 | Of ball-bearing steel | kg | Free | 29% | USITC | |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | kg | Free | 28% | USITC | |
| 7228.30.60.00 | Other | kg | Free | 29% | USITC | |
| 7228.30.80 | Other | Free | 28% | USITC | ||
| 7228.30.80.05 | Of high-nickel alloy steel | kg | Free | 28% | USITC | |
| 7228.30.80.10 | Concrete reinforcing bars and rods | kg | Free | 28% | USITC | |
| Other | ||||||
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | kg | Free | 28% | USITC | |
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | kg | Free | 28% | USITC | |
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | kg | Free | 28% | USITC | |
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | kg | Free | 28% | USITC | |
| 7228.40.00.00 | Other bars and rods, not further worked than forged | kg | Free | 28% | USITC | |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished | USITC | ||||
| 7228.50.10 | Of tool steel (other than high-speed steel) | Free | 29% | USITC | ||
| 7228.50.10.10 | Of ball-bearing steel | kg | Free | 29% | USITC | |
| Other | ||||||
| With a maximum cross-sectional dimension of less than 18 mm | ||||||
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | Free | 29% | USITC | |
| 7228.50.10.40 | Other | kg | Free | 29% | USITC | |
| With a maximum cross-sectional dimension of 18 mm or more | ||||||
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | Free | 29% | USITC | |
| 7228.50.10.80 | Other | kg | Free | 29% | USITC | |
| 7228.50.50 | Other | Free | 28% | USITC | ||
| 7228.50.50.05 | Of high-nickel alloy steel | kg | Free | 28% | USITC | |
| Other | ||||||
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm | kg | Free | 28% | USITC | |
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | kg | Free | 28% | USITC | |
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm | kg | Free | 28% | USITC | |
| 7228.60 | Other bars and rods | USITC | ||||
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | 29% | USITC | ||
| 7228.60.10.30 | Of ball-bearing steel | kg | Free | 29% | USITC | |
| 7228.60.10.60 | Other | kg | Free | 29% | USITC | |
| Other | ||||||
| 7228.60.60.00 | Not cold-formed | kg | Free | 28% | USITC | |
| 7228.60.80.00 | Cold-formed | kg | Free | 28% | USITC | |
| 7228.70 | Angles, shapes and sections | USITC | ||||
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | 10% | USITC | ||
| 7228.70.30.10 | U, I, H and T sections | kg | Free | 10% | USITC | |
| Other | ||||||
| With a maximum cross-sectional dimension of 76 mm or more | ||||||
| 7228.70.30.20 | Angles | kg | Free | 10% | USITC | |
| 7228.70.30.41 | Other | kg | Free | 10% | USITC | |
| With a maximum cross-sectional dimension of less than 76 mm | ||||||
| 7228.70.30.60 | Angles | kg | Free | 10% | USITC | |
| 7228.70.30.81 | Other | kg | Free | 10% | USITC | |
| 7228.70.60.00 | Other | kg | Free | 28% | USITC | |
| 7228.80.00.00 | Hollow drill bars and rods | kg | Free | 30% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7228 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.