HTS 7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| Not further worked than hot-rolled | ||||||
| 7220.11.00.00 | Of a thickness of 4.75 mm or more | kg | Free | 29% | USITC | |
| 7220.12 | Of a thickness of less than 4.75 mm | USITC | ||||
| 7220.12.10.00 | Of a width of 300 mm or more | kg | Free | 29% | USITC | |
| 7220.12.50.00 | Of a width of less than 300 mm | kg | Free | 34% | USITC | |
| 7220.20 | Not further worked than cold-rolled (cold-reduced) | USITC | ||||
| 7220.20.10 | Of a width of 300 mm or more | Free | 29% | USITC | ||
| Containing more than 0.5 percent but less than 24 percent by weight of nickel | ||||||
| 7220.20.10.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free | 29% | USITC | |
| 7220.20.10.15 | Other | kg | Free | 29% | USITC | |
| Other | ||||||
| 7220.20.10.60 | Containing less than 15 percent by weight of chromium | kg | Free | 29% | USITC | |
| 7220.20.10.80 | Other | kg | Free | 29% | USITC | |
| Of a width of less than 300 mm | ||||||
| 7220.20.60 | Of a thickness exceeding 1.25 mm | Free | 34% | USITC | ||
| 7220.20.60.05 | Of high-nickel alloy steel | kg | Free | 34% | USITC | |
| Other | ||||||
| Containing more than 0.5 percent by weight of nickel | ||||||
| 7220.20.60.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free | 34% | USITC | |
| 7220.20.60.15 | Other | kg | Free | 34% | USITC | |
| Other | ||||||
| 7220.20.60.60 | Containing less than 15 percent by weight of chromium | kg | Free | 34% | USITC | |
| 7220.20.60.80 | Other | kg | Free | 34% | USITC | |
| 7220.20.70 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | 34% | USITC | ||
| 7220.20.70.05 | Of high-nickel alloy steel | kg | Free | 34% | USITC | |
| Other | ||||||
| Containing more than 0.5 percent by weight of nickel | ||||||
| 7220.20.70.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free | 34% | USITC | |
| 7220.20.70.15 | Other | kg | Free | 34% | USITC | |
| Other | ||||||
| 7220.20.70.60 | Containing less than 15 percent by weight of chromium | kg | Free | 34% | USITC | |
| 7220.20.70.80 | Other | kg | Free | 34% | USITC | |
| Of a thickness not exceeding 0.25 mm | ||||||
| 7220.20.80.00 | Razor blade steel | kg | Free | 34% | USITC | |
| 7220.20.90 | Other | Free | 34% | USITC | ||
| 7220.20.90.30 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | kg | Free | 34% | USITC | |
| 7220.20.90.60 | Other | kg | Free | 34% | USITC | |
| 7220.90.00 | Other | Free | 46% | USITC | ||
| Containing more than 0.5 percent but less than 24 percent by weight of nickel | ||||||
| 7220.90.00.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free | 46% | USITC | |
| 7220.90.00.15 | Other | kg | Free | 46% | USITC | |
| Other | ||||||
| 7220.90.00.60 | Containing less than 15 percent by weight of chromium | kg | Free | 46% | USITC | |
| 7220.90.00.80 | Other | kg | Free | 46% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7220 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.