HTS 7211
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
| Code | Description | Unit | General | Special | Column 2 | Source |
|---|---|---|---|---|---|---|
| Not further worked than hot-rolled | ||||||
| 7211.13.00.00 | Universal mill plate | kg | Free | 20% | USITC | |
| 7211.14.00 | Other, of a thickness of 4.75 mm or more | Free | 20% | USITC | ||
| 7211.14.00.30 | Of high-strength steel | kg | Free | 20% | USITC | |
| Other | ||||||
| 7211.14.00.45 | Not in coils | kg | Free | 20% | USITC | |
| 7211.14.00.90 | Other | kg | Free | 20% | USITC | |
| 7211.19 | Other | USITC | ||||
| Of a width of less than 300 mm | ||||||
| 7211.19.15.00 | Of high-strength steel | kg | Free | 25% | USITC | |
| Other | ||||||
| 7211.19.20.00 | Of a thickness exceeding 1.25 mm | kg | Free | 25% | USITC | |
| 7211.19.30.00 | Other | kg | Free | 25% | USITC | |
| Other | ||||||
| 7211.19.45.00 | Of high-strength steel | kg | Free | 20% | USITC | |
| Other | ||||||
| 7211.19.60.00 | Pickled | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7211.19.75 | Other | Free | 20% | USITC | ||
| In coils | ||||||
| 7211.19.75.30 | With untrimmed edges | kg | Free | 20% | USITC | |
| 7211.19.75.60 | Other | kg | Free | 20% | USITC | |
| 7211.19.75.90 | Other | kg | Free | 20% | USITC | |
| Not further worked than cold-rolled (cold-reduced) | ||||||
| 7211.23 | Containing by weight less than 0.25 percent of carbon | USITC | ||||
| Of a width of less than 300 mm | ||||||
| Of a thickness exceeding 1.25 mm | ||||||
| 7211.23.15.00 | Of high-strength steel | kg | Free | 25% | USITC | |
| 7211.23.20.00 | Other | kg | Free | 25% | USITC | |
| 7211.23.30.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | kg | Free | 25% | USITC | |
| 7211.23.45.00 | Of a thickness not exceeding 0.25 mm | kg | Free | 25% | USITC | |
| 7211.23.60 | Other | Free | 0.4¢/kg + 20% | USITC | ||
| 7211.23.60.30 | Of a thickness exceeding 1.25 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7211.23.60.60 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7211.23.60.90 | Of a thickness not exceeding 0.25 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7211.29 | Other | USITC | ||||
| Of a width of less than 300 mm | ||||||
| 7211.29.20 | Of a thickness exceeding 0.25 mm | Free | 25% | USITC | ||
| 7211.29.20.30 | Of a width less than 51 mm, in coils | kg | Free | 25% | USITC | |
| 7211.29.20.90 | Other | kg | Free | 25% | USITC | |
| 7211.29.45.00 | Other | kg | Free | 25% | USITC | |
| 7211.29.60 | Other | Free | 0.4¢/kg + 20% | USITC | ||
| 7211.29.60.30 | Of a thickness exceeding 1.25 mm | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7211.29.60.80 | Other | kg | Free | 0.4¢/kg + 20% | USITC | |
| 7211.90.00.00 | Other | kg | Free | 20% | USITC | |
The table scrolls sideways.
Source: USITC, Harmonized Tariff Schedule of the United States – 2026 HTS Revision 20, effective 28 September 2026. Heading 7211 at USITC
Not shown: the additional duties of Chapter 99 (such as Section 301 and Section 232), anti-dumping and countervailing duties, quotas and the legal notes.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.