Skip to the content

CN 8512

Electrical lighting or signalling equipment (excluding articles of heading 8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles

19 lines EU TARIC, EU Combined Nomenclature (CN) & TARIC – extraction 01-10-2026

CodeDescriptionUnitThird-country dutySource
8512 10 00 00Lighting or visual signalling equipment of a kind used on bicycles2.7%TARIC
8512 20Other lighting or visual signalling equipmentTARIC
8512 20 00 25An electrical component with an integrated LED, in an ABS housing, with: -a voltage of 11 V or more, but not more than 15 V, -a circular shape, -2 terminals, -an outer diameter of the housing of 36 mm or more, but not more than 42,5 mm, -a diode voltage of 42 V or more, but not more than 48 V and -a current of 55 mA or more, but not more than 65 mA2.7%TARIC
8512 20 00 35Sub-assembly reflectors and components for car rear lights: -containing two or three PCBA with a connection socket and LED, -with central control module (CCE) connected through wired harness, -with a main reflector, a sub-reflector and inner lens scattering the light made of plastic, -with depth of 119 mm or more, but not more than 146 mm, -with width of 142 mm or more, but not more than 490 mm, -with a height of 93 mm or more, but not more than 100 mm, -a weight of 414 g or more, but not more than 578 g, -with lightguide2.7%TARIC
8512 20 00 60Information screen displaying: -at least time, date and status of safety features in a vehicle, or -safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit, with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87p/st2.7%TARIC
8512 20 00 70Electrical component with light guide integrated with LED, for motor vehicles with: -two parallel ribs in the front area with a distance between them of 1,4 mm or more but not more than 1,8 mm, -four holes with the dimension of 7,3 mm or more but not more than 7,9 mm in the short direction of the guide, and -a 3 pines connector, for use in the manufacture of automotive components2.7%TARIC
8512 20 00 80Grab handle light with integrated LED, for motor vehicles: -a distance between integrated spring clip and surface of 0,85 mm or more but not more than 1,85 mm, -a length of the housing to two front vertical ribs of 26,45 mm or more but not more than 26,75 mm, and -four horizontal ribs where the distance on the lower area over the base radia between the two is 18,5 mm or more but not more than 18,7 mm, for use in the manufacture of automotive components2.7%TARIC
8512 20 00 90Other2.7%TARIC
8512 30Sound signalling equipmentTARIC
8512 30 10 00Burglar alarms of a kind used for motor vehiclesp/st2.2%TARIC
8512 30 90OtherTARIC
8512 30 90 20Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: - a printed circuit board, - a connector, - whether or not a metal holder for use in the manufacture of goods of chapter 87p/st2.7%TARIC
8512 30 90 90Other2.7%TARIC
8512 40Windscreen wipers, defrosters and demistersTARIC
8512 40 00 10Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides2.7%TARIC
8512 40 00 90Other2.7%TARIC
8512 90PartsTARIC
8512 90 10 00Of apparatus of subheading 8512 30 102.2%TARIC
8512 90 90 00Other2.7%TARIC

The table scrolls sideways.

Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 8512 in the TARIC consultation

Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.

This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.

All headings of chapter 85: ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES