CN 8479
Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| 8479 10 00 00 | Machinery for public works, building or the like | 0% | TARIC | |
| 8479 20 00 00 | Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils | 1.7% | TARIC | |
| 8479 30 | Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork | TARIC | ||
| 8479 30 10 00 | Presses | 1.7% | TARIC | |
| 8479 30 90 00 | Other | 1.7% | TARIC | |
| 8479 40 00 00 | Rope- or cable-making machines | p/st | 1.7% | TARIC |
| 8479 50 00 00 | Industrial robots, not elsewhere specified or included | 1.7% | TARIC | |
| 8479 60 00 00 | Evaporative air coolers | 1.7% | TARIC | |
| Passenger boarding bridges | ||||
| 8479 71 00 00 | Of a kind used in airports | 1.7% | TARIC | |
| 8479 79 00 00 | Other | 1.7% | TARIC | |
| Other machines and mechanical appliances | ||||
| 8479 81 00 00 | For treating metal, including electric wire coil-winders | 1.7% | TARIC | |
| 8479 82 00 00 | Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines | 1.7% | TARIC | |
| 8479 83 00 00 | Cold isostatic presses | 1.7% | TARIC | |
| 8479 89 | Other | TARIC | ||
| 8479 89 30 00 | Mobile hydraulic-powered mine roof supports | 1.7% | TARIC | |
| 8479 89 60 00 | Central greasing systems | 1.7% | TARIC | |
| 8479 89 70 00 | Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies | 0% | TARIC | |
| 8479 89 97 | Other | TARIC | ||
| 8479 89 97 10 | The following goods, for use in civil aircraft :!1!Hydropneumatic batteries;!1!Mechanical actuators for thrust reversers;!1!Toilet units specially designed;!1!Air humidifiers and dehumidifiers;!1!Servo-mechanisms, non-electric;!1!Non-electric starter motors;!1!Pneumatic starters for turbo-jets, turbopropellers and other gas turbines;!1!Windscreen wipers, non-electric;!1!Propeller regulators, non-electric!1! | 0% (end-use) | TARIC | |
| 8479 89 97 28 | Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: -electronic brake assistants, -hydraulic unit driven by brushless electric motor, -brake fluid reservoir, for use in the manufacture of hybrid passenger cars | 1.7% | TARIC | |
| 8479 89 97 33 | Pre-assembled process module unit of an ethane cracker unit, containing: -various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums, -a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream, -a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit), -associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and -a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers | 1.7% | TARIC | |
| 8479 89 97 38 | Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles | 1.7% | TARIC | |
| 8479 89 97 43 | Pre-assembled process module unit of an ethane cracker unit, containing: -a system for filtering and cooling of dried cracked gas, -a deethanizer distillation column and associated equipment for C2-/C3+ separation, -an acetylene hydrogenation system to remove acetylene within a C2 stream, -a fuel gas drum that stores fuel gas for cracker furnaces, and -a system to regenerate dryers in a cracker installation | 1.7% | TARIC | |
| 8479 89 97 60 | Bioreactor for biopharmaceutical cell culture - having interior surfaces of austenitic stainless steel, and - with a process capacity up to 15 000 litres, - whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel | p/st | 1.7% | TARIC |
| 8479 89 97 90 | Other | 1.7% | TARIC | |
| 8479 90 | Parts | TARIC | ||
| 8479 90 15 00 | Parts of machines of subheading 8479 89 70 | 0% | TARIC | |
| Other | ||||
| 8479 90 20 | Of cast iron or cast steel | TARIC | ||
| 8479 90 20 10 | For use in civil aircraft | 0% (end-use) | TARIC | |
| 8479 90 20 90 | Other | 1.7% | TARIC | |
| 8479 90 70 | Other | TARIC | ||
| 8479 90 70 10 | For use in civil aircraft | 0% (end-use) | TARIC | |
| Other | ||||
| 8479 90 70 30 | Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | p/st | 1.7% | TARIC |
| 8479 90 70 40 | Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: -of a circular shape, -made of steel alloy with sintering process, -with not more than 8 oil chambers, -with a Rockwell hardness of 55 or more, -with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³ | 1.7% | TARIC | |
| 8479 90 70 60 | High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle | p/st | 1.7% | TARIC |
| 8479 90 70 85 | Injectors with solenoid valve for optimised atomisation in the engine combustion chamber | p/st | 1.7% | TARIC |
| 8479 90 70 99 | Other | 1.7% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 8479 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.