CN 7410
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| Not backed | ||||
| 7410 11 | Of refined copper | TARIC | ||
| 7410 11 00 50 | Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry | 5.2% | TARIC | |
| 7410 11 00 90 | Other | 5.2% | TARIC | |
| 7410 12 00 00 | Of copper alloys | 5.2% | TARIC | |
| Backed | ||||
| 7410 21 | Of refined copper | TARIC | ||
| 7410 21 00 10 | Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil | 5.2% | TARIC | |
| 7410 21 00 20 | Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10 % for use in the production of smart cards | m² | 5.2% | TARIC |
| 7410 21 00 30 | Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil | 5.2% | TARIC | |
| 7410 21 00 40 | Sheet or plates: - consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or - consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm | 5.2% | TARIC | |
| 7410 21 00 50 | Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and -with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650 | 5.2% | TARIC | |
| 7410 21 00 55 | Plates: - consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, - covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, - with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a comparative tracking index (CTI) of 600 or more | m² | 5.2% | TARIC |
| 7410 21 00 65 | Sheets or Plates -consisting of at least one layer of fiberglass fabric impregnated with modified epoxy resin, without the use of halogenated flame retardants, -covered on one or both sides with copper foil with a thickness of 0,15 mm or less, -and with a TG of 145°C or more but not more than 280°C according to TMA, in agreement with IPC-4101/128 or 4101/130 or IPC-4101/153 or 4101/154 | 5.2% | TARIC | |
| 7410 21 00 90 | Other | 5.2% | TARIC | |
| 7410 22 00 00 | Of copper alloys | 5.2% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 7410 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.