CN 3920
Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| 3920 10 | Of polymers of ethylene | TARIC | ||
| Of a thickness not exceeding 0,125 mm | ||||
| Of polyethylene having a specific gravity of | ||||
| Less than 0,94 | ||||
| 3920 10 23 00 | Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits | 0% (end-use) | TARIC | |
| 3920 10 24 | Stretch film, not printed | TARIC | ||
| 3920 10 24 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 10 24 90 | Other | 6.5% | TARIC | |
| 3920 10 25 | Other | TARIC | ||
| 3920 10 25 05 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 10 25 90 | Other | 6.5% | TARIC | |
| 3920 10 28 | 0,94 or more | TARIC | ||
| 3920 10 28 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 10 28 99 | Other | 6.5% | TARIC | |
| 3920 10 40 | Other | TARIC | ||
| 3920 10 40 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 10 40 99 | Other | 6.5% | TARIC | |
| Of a thickness exceeding 0,125 mm | ||||
| 3920 10 81 00 | Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent | 0% | TARIC | |
| 3920 10 89 | Other | TARIC | ||
| 3920 10 89 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3920 10 89 40 | Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm | 6.5% | TARIC | |
| 3920 10 89 90 | Other | 6.5% | TARIC | |
| 3920 20 | Of polymers of propylene | TARIC | ||
| Of a thickness not exceeding 0,10 mm | ||||
| 3920 20 21 | Biaxially oriented | TARIC | ||
| 3920 20 21 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 20 21 50 | Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron | 6.5% | TARIC | |
| 3920 20 21 90 | Other | 6.5% | TARIC | |
| 3920 20 29 | Other | TARIC | ||
| 3920 20 29 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3920 20 29 70 | Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: - a thickness of 55 µm or more but not more than 97 µm, - a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and - a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa | 6.5% | TARIC | |
| 3920 20 29 94 | Mono-axial oriented, co-extruded film: -consisting of 3 to 5 layers, -each layer mainly consisting of polypropylene and/or polyethylene, -each layer containing not more than 10 % by weight of other polymers, -whether or not containing titanium dioxide in the core layer, -of an overall thickness of not more than 75 μm | 6.5% | TARIC | |
| 3920 20 29 99 | Other | 6.5% | TARIC | |
| 3920 20 80 | Of a thickness exceeding 0,10 mm | TARIC | ||
| 3920 20 80 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 20 80 90 | Other | 6.5% | TARIC | |
| 3920 30 | Of polymers of styrene | TARIC | ||
| 3920 30 00 10 | Acrylonitrile-butadiene-styrene, for use in certain types of aircraft | 6.5% | TARIC | |
| 3920 30 00 30 | Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls with: -a thickness of 0,229 mm or more but not more than 0,279 mm, -an titanium dioxide content by weight of 3 % or more but not more than 3,5 %, -on one side a highly hydrophobic, chemically neutral and non-reactive coating | 6.5% | TARIC | |
| 3920 30 00 90 | Other | 6.5% | TARIC | |
| Of polymers of vinyl chloride | ||||
| 3920 43 | Containing by weight not less than 6 % of plasticisers | TARIC | ||
| 3920 43 10 | Of a thickness not exceeding 1 mm | TARIC | ||
| 3920 43 10 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3920 43 10 92 | Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) | 6.5% | TARIC | |
| 3920 43 10 95 | Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet | 6.5% | TARIC | |
| 3920 43 10 99 | Other | 6.5% | TARIC | |
| 3920 43 90 | Of a thickness exceeding 1 mm | TARIC | ||
| 3920 43 90 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 43 90 90 | Other | 6.5% | TARIC | |
| 3920 49 | Other | TARIC | ||
| 3920 49 10 | Of a thickness not exceeding 1 mm | TARIC | ||
| 3920 49 10 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3920 49 10 30 | Film of a (polyvinyl)chloride-copolymer - containing by weight 45 % or more of fillers - on a support | 6.5% | TARIC | |
| 3920 49 10 99 | Other | 6.5% | TARIC | |
| 3920 49 90 | Of a thickness exceeding 1 mm | TARIC | ||
| 3920 49 90 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| 3920 49 90 90 | Other | 6.5% | TARIC | |
| Of acrylic polymers | ||||
| 3920 51 | Of poly(methyl methacrylate) | TARIC | ||
| 3920 51 00 20 | Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm | 6.5% | TARIC | |
| 3920 51 00 30 | Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 125μm | 6.5% | TARIC | |
| 3920 51 00 40 | Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) | 6.5% | TARIC | |
| 3920 51 00 50 | Sheets of polymethylmethacrylate conforming to standard — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A | 6.5% | TARIC | |
| 3920 51 00 90 | Other | 6.5% | TARIC | |
| 3920 59 | Other | TARIC | ||
| 3920 59 10 00 | Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres | 0% | TARIC | |
| 3920 59 90 00 | Other | 6.5% | TARIC | |
| Of polycarbonates, alkyd resins, polyallyl esters or other polyesters | ||||
| 3920 61 | Of polycarbonates | TARIC | ||
| 3920 61 00 30 | Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet | 6.5% | TARIC | |
| 3920 61 00 40 | Extruded thermoplastic foils or films of polycarbonate with: -matt surface texture on both sides -a thickness of more than 50 μm but not more than 200 μm, -a width of 800 mm or more, but not more than 1 500 mm, and -a length of 300 m or more, but not more 2500 m for use in the production of retroreflective products | 6.5% | TARIC | |
| 3920 61 00 50 | Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: -total thickness of more than 230 μm but not more than 270 μm, -top layer thickness of more than 40 μm but not more than 55 μm, -defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287), -UV-stabilized top layer | 6.5% | TARIC | |
| 3920 61 00 90 | Other | 6.5% | TARIC | |
| 3920 62 | Of poly(ethylene terephthalate) | TARIC | ||
| Of a thickness not exceeding 0,35 mm | ||||
| 3920 62 12 00 | Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates | 0% (end-use) | TARIC | |
| 3920 62 19 | Other | TARIC | ||
| 3920 62 19 05 | Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm | 6.5% | TARIC | |
| 3920 62 19 08 | Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side | 6.5% | TARIC | |
| 3920 62 19 28 | Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites | 6.5% | TARIC | |
| 3920 62 19 32 | Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm | 6.5% | TARIC | |
| 3920 62 19 38 | Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm | 6.5% | TARIC | |
| 3920 62 19 48 | Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm) | 6.5% | TARIC | |
| 3920 62 19 52 | Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method) | 6.5% | TARIC | |
| 3920 62 19 60 | Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm | 6.5% | TARIC | |
| 3920 62 19 70 | Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months | 6.5% | TARIC | |
| 3920 62 19 79 | Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm | m² | 6.5% | TARIC |
| 3920 62 19 85 | Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules | 6.5% | TARIC | |
| 3920 62 19 99 | Other | 6.5% | TARIC | |
| 3920 62 90 | Of a thickness exceeding 0,35 mm | TARIC | ||
| 3920 62 90 10 | Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm | 6.5% | TARIC | |
| 3920 62 90 90 | Other | 6.5% | TARIC | |
| 3920 63 00 00 | Of unsaturated polyesters | 6.5% | TARIC | |
| 3920 69 | Of other polyesters | TARIC | ||
| 3920 69 00 20 | Film of poly(ethylene naphthalene-2,6-dicarboxylate) | 6.5% | TARIC | |
| 3920 69 00 30 | Mono- or multilayer, transverse oriented, shrink film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 20 μm or more but not more than 100 μm, -with a length of 2 385 m or more but not more than 9 075 m, -biodegradable and compostable (as determined by the method EN 13432) | 6.5% | TARIC | |
| 3920 69 00 70 | Mono- or multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 9 μm or more but not more than 120 μm, -with a length of 1 395 m or more but not more than 21 560 m, -biodegradable and compostable (as determined by the method EN 13432) | 6.5% | TARIC | |
| 3920 69 00 90 | Other | 6.5% | TARIC | |
| Of cellulose or its chemical derivatives | ||||
| 3920 71 00 00 | Of regenerated cellulose | 6.5% | TARIC | |
| 3920 73 | Of cellulose acetate | TARIC | ||
| 3920 73 10 00 | Film in rolls or in strips, for cinematography or photography | 6.3% | TARIC | |
| 3920 73 80 00 | Other | 6.5% | TARIC | |
| 3920 79 | Of other cellulose derivatives | TARIC | ||
| 3920 79 10 00 | Of vulcanised fibre | 5.7% | TARIC | |
| 3920 79 90 00 | Other | 6.5% | TARIC | |
| Of other plastics | ||||
| 3920 91 | Of poly(vinyl butyral) | TARIC | ||
| 3920 91 00 10 | For use in certain types of aircraft | 6.1% | TARIC | |
| Other | ||||
| 3920 91 00 52 | Poly(vinyl butyral) film: - containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, - with a thickness of 0,73 mm or more but not more than 1,50 mm | 6.1% | TARIC | |
| 3920 91 00 91 | Poly(vinyl butyral) film having a graduated coloured band | 6.1% | TARIC | |
| 3920 91 00 93 | Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: - a visible light transmission of 50 % or more, - coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), - a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm | 6.1% | TARIC | |
| Co-extruded trilayer poly(vinyl butyral) film | ||||
| 3920 91 00 95 | Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser | 6.1% | TARIC | |
| 3920 91 00 97 | Other | 6.1% | TARIC | |
| 3920 91 00 99 | Other | 6.1% | TARIC | |
| 3920 92 00 00 | Of polyamides | 6.5% | TARIC | |
| 3920 93 00 00 | Of amino-resins | 6.5% | TARIC | |
| 3920 94 00 00 | Of phenolic resins | 6.5% | TARIC | |
| 3920 99 | Of other plastics | TARIC | ||
| Of condensation or rearrangement polymerisation products, whether or not chemically modified | ||||
| 3920 99 21 00 | Polyimide foil and strip, uncoated, or coated or covered solely with plastic | 0% | TARIC | |
| 3920 99 28 | Other | TARIC | ||
| 3920 99 28 40 | Polymer film containing the following monomers: - poly (tetramethylene ether glycol), - bis (4-isocyanotocyclohexyl) methane, - 1,4-butanediol or 1,3-butanediol, - with a thickness of 0,25 mm or more but not more than 5,0 mm, - embossed with a regular pattern on one surface, - and covered with a release sheet | 6.5% | TARIC | |
| 3920 99 28 50 | Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm | m² | 6.5% | TARIC |
| 3920 99 28 65 | Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (± 10 mm), - a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), - a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), - a thickness of more than 365 µm but not more than 760 µm, - a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), - an elongation to break of 470 % (as determined by the method: EN ISO 527) | m² | 6.5% | TARIC |
| 3920 99 28 70 | Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: - microspheres with a coating of metal, whether or not alloyed with gold, - an adhesive layer, - with a protective layer of silicone or poly(ethylene terephthalate) on one side, - with a protective layer of poly(ethylene terephthalate) on the other side, and - with a width of 5 cm or more but not more than 100 cm - with a length of not more than 2 000 m | 6.5% | TARIC | |
| 3920 99 28 90 | Other | 6.5% | TARIC | |
| Of addition polymerisation products | ||||
| 3920 99 52 00 | Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm | 0% | TARIC | |
| 3920 99 53 00 | Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells | 0% (end-use) | TARIC | |
| 3920 99 59 | Other | TARIC | ||
| 3920 99 59 10 | For use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3920 99 59 25 | Poly(1-chlorotrifluoroethylene) film | 6.5% | TARIC | |
| 3920 99 59 65 | Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 % | 6.5% | TARIC | |
| 3920 99 59 90 | Other | 6.5% | TARIC | |
| 3920 99 90 00 | Other | 6.5% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 3920 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.