CN 3902
Polymers of propylene or of other olefins, in primary forms
| Code | Description | Unit | Third-country duty | Source |
|---|---|---|---|---|
| 3902 10 | Polypropylene | TARIC | ||
| 3902 10 00 20 | Polypropylene, containing no plasticiser, - of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), - of a heat of fusion of 15 J/g or more but not more than 70 J/g, - of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), - of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method) | 6.5% | TARIC | |
| 3902 10 00 90 | Other | 6.5% | TARIC | |
| 3902 20 | Polyisobutylene | TARIC | ||
| 3902 20 00 20 | Hydrogenated polyisobutene, in liquid form | 6.5% | TARIC | |
| 3902 20 00 90 | Other | 6.5% | TARIC | |
| 3902 30 | Propylene copolymers | TARIC | ||
| 3902 30 00 10 | For cavity filling, for use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3902 30 00 20 | Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene | 6.5% | TARIC | |
| 3902 30 00 30 | Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene | 6.5% | TARIC | |
| 3902 30 00 95 | A-B-A block copolymer, consisting of: - a copolymer of propylene and ethylene and - 21 % (± 3 %) by weight of polystyrene | 6.5% | TARIC | |
| 3902 30 00 97 | Liquid ethylene-propylene-copolymer with: - a flashpoint of 250 °C or more, - a viscosity index of 150 or more, - of a number average molecular weight (M@n) of 650 or more | 6.5% | TARIC | |
| 3902 30 00 99 | Other | 6.5% | TARIC | |
| 3902 90 | Other | TARIC | ||
| 3902 90 10 00 | A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter | 0% | TARIC | |
| 3902 90 20 00 | Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10 % or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10 % or less of polyethylene and/or 25 % or less of polypropylene, in one of the forms mentioned in note 6(b) to this chapter | 0% | TARIC | |
| 3902 90 90 | Other | TARIC | ||
| 3902 90 90 10 | For cavity filling, for use in certain types of aircraft | 6.5% | TARIC | |
| Other | ||||
| 3902 90 90 60 | Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: - liquid at room temperature - obtained by cationic polymerisation of C-5 alkenes monomers - with a number average molecular weight (Mn) of 370 (± 50) - with a weight average molecular weight (Mw) of 500 (± 100) | 6.5% | TARIC | |
| 3902 90 90 63 | Hydrogenated poly(1-octene) (CAS RN 70693-43-5) | 6.5% | TARIC | |
| 3902 90 90 65 | Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39 | 6.5% | TARIC | |
| 3902 90 90 70 | Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without: -not more than 40 % by weight of tetradecene and/or -not more than 2 % by weight decene and/or -not more than 2 % by weight of hexadecene | 6.5% | TARIC | |
| 3902 90 90 94 | Chlorinated polyolefins, whether or not in a solution or dispersion | 6.5% | TARIC | |
| 3902 90 90 99 | Other | 0% | TARIC | |
The table scrolls sideways.
Source: European Commission (DG TAXUD), TARIC and Combined Nomenclature data as extracted on 1 October 2026. Heading 3902 in the TARIC consultation
Only the third-country duty is shown. Not shown: tariff preferences, quotas, suspensions, anti-dumping and other additional duties, import controls and the legal notes. The TARIC consultation lists the measures of each code.
This page is general information, not legal advice and not a classification decision. Tariff texts and rates change: check the publisher's current schedule, and ask the customs authority for a binding ruling where the answer matters.